Akron [車用品・バイク用品]
166件中 91件 - 120件
1 2 3 4 5 6
| 商品 | 説明 | 価格 |
|---|---|---|
 Highsider ハイサイダー Akron-RS プロ ナンバープレートホルダー ZX-10R ウェビック 楽天市場店 | ■商品概要【メーカー品番】280-722HP■詳細説明HIGHSIDER AKRON-RS PRO license plate holder incl． license plate lightThe HIGHSIDER AKRON-RS PRO license plate holder adapts perfectly to the lines of your bike thanks to its design．The model-specific bracket of the AKRON-RS PRO allows mounting on the original mounting points of your bike and thus a replacement without further drilling or cutting． To prevent damage to cables， all sharp-edged feedthroughs are protected by a rubber membrane grommet． The license plate is made of sheet steel and 2 mm thick． The precise cutting is done by laser． After edging， the weather-resistant black powder coating is applied．This ensures the optimal fit and durability．Through the stepless adjustment you can bring the plate without drilling in the desired position． To keep the plate in this position， there is an additional locking screw．The AKRON-RS PRO’s turn signal brackets are adjustable in width， making them suitable for any type of accessory turn signal． This adjustment option allows you to adapt the position for your turn signals to the most varied number plates． To allow mounting the turn signals without disconnecting them from the wiring harness， the 10 mm holes are slotted to the side．You can also adjust the position of the reflector individually via a slider． An adaptation to the different designs of the EU license plates is therefore no problem．To screw the license plate securely and reduce vibration， two rubber washers are included． Another rubber buffer supports the license plate on its underside．Included in this PRO version of the AKRON-RS is the very small HIGHSIDER license plate light machined from high quality aluminum with mounting plate and support arm． The bracket is adjustable in height and designed to allow mounting in the legally required position．Details: - model-specific bracket - infinitely adjustable turn signal holder - slotted turn signal holder for easy mounting without cable separation - infinitely adjustable reflector， E-approved - suitable for European number plates - infinitely adjustable tilt angle - additional screw for optimum position security - easy fixation without further work steps (eg．e．g． drilling) - easy mounting of the license plate through slotted holes - license plate light incl． Holder included - license plate light， E-approved - infinitely adjustable license plate light - many different options for mounting the license plate light Included with the AKRON-RS PRO are: - Model-specific bracket with mounting parts - AKRON-RS license plate mounting plate - Adjustable turn signal brackets - E-approved reflector with adjustable bracket - E-approved license plate light - Mounting instructions Note:The special 280-974 turn signal bracket is available as an option for the original turn signals． Tip: If you have not found a model-specific license plate holder for your vehicle， then you will certainly find the universal license plate holders from HIGHSIDER， which are available in many different designs．■注意点※ナンバープレートサイズが日本の規格ではありませんので、取り付ける際にはステーによる加工などが必要なりますのでご注意下さい。※輸入品のため、説明書が付属する場合、外国語の説明書となります。※メーカー都合により商品の仕様変更がある場合がございます。ご了承ください。 ※画像はイメージです。■適合車種ZX-10R ZX-10R ■商品番号1108243 | 18,588円 |
 Highsider ハイサイダー Akron-RS ナンバープレートホルダー (ライト なし) XSR 900 XSR 900 ABS (RN43) XSR 900 SPECIAL EDITION ABS (RN43) ウェビック 楽天市場店 | ■商品概要【メーカー品番】280-921H■詳細説明HIGHSIDER AKRON-RS license plate holder The HIGHSIDER AKRON-RS license plate holder adapts perfectly to the lines of your bike with its design．The model-specific bracket of the HIGHSIDER AKRON-RS allows mounting on the original mounting points of your bike and thus a replacement without further drilling or cutting． To prevent damage to cables， all sharp-edged feedthroughs are protected by a rubber membrane grommet． The license plate is made of sheet steel and 2 mm thick． The precise cutting is done by laser． After edging， the weather-resistant black powder coating is applied．This ensures the optimal fit and durability．Through the stepless adjustment you can bring the plate without drilling in the desired position． To keep the plate in this position， there is an additional locking screw．The turn signal brackets of the HIGHSIDER AKRON-RS are adjustable in width and therefore suitable for any type of accessory turn signal． This adjustment option allows you to adapt the position for your turn signals to the most varied number plates． To allow mounting the turn signals without disconnecting them from the wiring harness， the 10 mm holes are slotted to the side．You can also adjust the position of the reflector individually via a slider． An adaptation to the different designs of the EU license plates is therefore no problem．To screw the license plate securely and reduce vibration， two rubber washers are included． Another rubber buffer supports the license plate on its underside．Details: - model-specific bracket - infinitely adjustable turn signal holder - slotted turn signal holder for easy mounting without cable separation - infinitely adjustable reflector， E-approved - suitable for European license plates - infinitely adjustable tilt angle - additional screw for optimum position security - easy fixation without further work steps (eg． Drilling) - easy mounting of the license plate through slotted holesIncluded in the scope of delivery of the HIGHSIDER AKRON-RS are: - Model-specific bracket with mounting parts - HIGHSIDER AKRON-RS license plate retaining plate - Adjustable turn signal holders - E-tested reflector with adjustable holder - Mounting instructions Notes: - A special turn signal holder is optionally available for the original turn signals in the accessories tab． - If your original number plate holder has reflectors fitted to the side， these must be refitted in a suitable position or replaced with new ones． Tips: If you have not found a model-specific license plate holder for your vehicle， the universal license plate holders from HIGHSIDER， which are available in many different designs， are certainly a good alternative．■注意点※ナンバープレートサイズが日本の規格ではありませんので、取り付ける際にはステーによる加工などが必要なりますのでご注意下さい。※輸入品のため、説明書が付属する場合、外国語の説明書となります。※メーカー都合により商品の仕様変更がある場合がございます。ご了承ください。 ※画像はイメージです。■適合車種XSR 900 XSR 900 年式: 20-21 XSR 900 ABS (RN43) XSR 900 ABS (RN43) 年式: 16-19 XSR 900 SPECIAL EDITION ABS (RN43) XSR 900 SPECIAL EDITION ABS (RN43) 年式: 16-18 ■商品番号1108330 | 18,588円 |
 Highsider ハイサイダー Akron-RS ナンバープレートホルダー (ライト なし) CBR 1000 RR FIREBLADE (SC57) CBR 600 RR (PC37) ウェビック 楽天市場店 | ■商品概要【メーカー品番】280-602H■詳細説明HIGHSIDER AKRON-RS license plate holderThe HIGHSIDER AKRON-RS license plate holder adapts perfectly to the lines of your bike thanks to its design．The model-specific bracket of the AKRON-RS allows mounting on the original mounting points of your bike and thus a replacement without further drilling or cutting． To prevent damage to cables， all sharp-edged feedthroughs are protected by a rubber membrane grommet． The license plate is made of sheet steel and 2 mm thick． The precise cutting is done by laser． After edging， the weather-resistant black powder coating is applied．This ensures the optimal fit and durability．Through the stepless adjustment you can bring the plate without drilling in the desired position． To keep the plate in this position， there is an additional locking screw．The AKRON-RS turn signal brackets are adjustable in width and therefore suitable for any type of accessory turn signal． This adjustment option allows you to adapt the position for your turn signals to the most varied number plates． To allow mounting the turn signals without disconnecting them from the wiring harness， the 10 mm holes are slotted to the side．You can also adjust the position of the reflector individually via a slider． An adaptation to the different designs of the EU license plates is therefore no problem．To screw the license plate securely and reduce vibration， two rubber washers are included． Another rubber buffer supports the license plate on its underside．Details: - model-specific bracket - infinitely adjustable turn signal holder - slotted turn signal holder for easy mounting without cable separation - infinitely adjustable reflector， E-approved - suitable for European number plates - infinitely adjustable tilt angle - additional screw for optimum position security - easy fixing without further work steps (e． g．B． Drilling) - easy mounting of the license plate through slotted holesThe scope of delivery of the AKRON-RS includes: - Model-specific bracket with mounting parts - AKRON-RS license plate mounting plate - Adjustable turn signal brackets - E-tested reflector with adjustable bracket - Mounting instructions Note:The special turn signal bracket 280-973 is optionally available for the original turn signals． Tip: If you have not found a model-specific license plate holder for your vehicle， the universal license plate holders from HIGHSIDER， which are available in many different designs， are certainly a good alternative．■注意点※ナンバープレートサイズが日本の規格ではありませんので、取り付ける際にはステーによる加工などが必要なりますのでご注意下さい。※輸入品のため、説明書が付属する場合、外国語の説明書となります。※メーカー都合により商品の仕様変更がある場合がございます。ご了承ください。 ※画像はイメージです。■適合車種CBR 1000 RR FIREBLADE (SC57) CBR 1000 RR FIREBLADE (SC57) 年式: 04-07 CBR 600 RR (PC37) CBR 600 RR (PC37) 年式: 03-06 ■商品番号1108160 | 16,529円 |
 Highsider ハイサイダー Akron-RS ナンバープレートホルダー (ライト なし) ウェビック 楽天市場店 | ■商品概要【メーカー品番】280-002H■詳細説明HIGHSIDER AKRON-RS license plate holderThe HIGHSIDER AKRON-RS license plate holder adapts perfectly to the lines of your bike thanks to its design．The model-specific bracket of the AKRON-RS allows mounting on the original mounting points of your bike and thus a replacement without further drilling or cutting． To prevent damage to cables， all sharp-edged feedthroughs are protected by a rubber membrane grommet． The license plate is made of sheet steel and 2 mm thick． The precise cutting is done by laser． After edging， the weather-resistant black powder coating is applied．This ensures the optimal fit and durability．Through the stepless adjustment you can bring the plate without drilling in the desired position． To keep the plate in this position， there is an additional locking screw．The AKRON-RS turn signal brackets are adjustable in width and therefore suitable for any type of accessory turn signal． This adjustment option allows you to adapt the position for your turn signals to the most varied number plates． To allow mounting the turn signals without disconnecting them from the wiring harness， the 10 mm holes are slotted to the side．You can also adjust the position of the reflector individually via a slider． An adaptation to the different designs of the EU license plates is therefore no problem．To screw the license plate securely and reduce vibration， two rubber washers are included． Another rubber buffer supports the license plate on its underside．Details: - model-specific bracket - infinitely adjustable turn signal holder - slotted turn signal holder for easy mounting without cable separation - infinitely adjustable reflector， E-approved - suitable for European number plates - infinitely adjustable tilt angle - additional screw for optimum position security - easy fixing without further work steps (e． g．B． Drilling) - easy mounting of the license plate through slotted holesThe scope of delivery of the AKRON-RS includes: - Model-specific bracket with mounting parts - AKRON-RS license plate mounting plate - Adjustable turn signal brackets - E-tested reflector with adjustable bracket - Mounting instructions Note:The special turn signal bracket 280-970 is optionally available for the original turn signals． Tips: If you have not found a model-specific license plate holder for your vehicle， then you will certainly find the universal license plate holders from HIGHSIDER， which are available in many different designs．■注意点※ナンバープレートサイズが日本の規格ではありませんので、取り付ける際にはステーによる加工などが必要なりますのでご注意下さい。※輸入品のため、説明書が付属する場合、外国語の説明書となります。※メーカー都合により商品の仕様変更がある場合がございます。ご了承ください。 ※画像はイメージです。■商品番号1108065 | 16,529円 |
 Highsider ハイサイダー Akron-RS ナンバープレートホルダー (ライト なし) CB 125 R NEO SPORT CAFE ABS (JC79) ウェビック 楽天市場店 | ■商品概要【メーカー品番】280-614H■詳細説明HIGHSIDER AKRON-RS license plate holderThe HIGHSIDER AKRON-RS license plate holder adapts perfectly to the lines of your bike thanks to its design．The model-specific bracket of the AKRON-RS allows mounting on the original mounting points of your bike and thus a replacement without further drilling or cutting． To prevent damage to cables， all sharp-edged feedthroughs are protected by a rubber membrane grommet． The license plate is made of sheet steel and 2 mm thick． The precise cutting is done by laser． After edging， the weather-resistant black powder coating is applied．This ensures the optimal fit and durability．Through the stepless adjustment you can bring the plate without drilling in the desired position． To keep the plate in this position， there is an additional locking screw．The AKRON-RS turn signal brackets are adjustable in width and therefore suitable for any type of accessory turn signal． This adjustment option allows you to adapt the position for your turn signals to the most varied number plates． To allow mounting the turn signals without disconnecting them from the wiring harness， the 10 mm holes are slotted to the side．You can also adjust the position of the reflector individually via a slider． An adaptation to the different designs of the EU license plates is therefore no problem．To screw the license plate securely and reduce vibration， two rubber washers are included． Another rubber buffer supports the license plate on its underside．Details: - model-specific bracket - infinitely adjustable turn signal holder - slotted turn signal holder for easy mounting without cable separation - infinitely adjustable reflector， E-approved - suitable for European number plates - infinitely adjustable tilt angle - additional screw for optimum position security - easy fixing without further work steps (e． g．B． Drilling) - easy mounting of the license plate through slotted holesThe scope of delivery of the AKRON-RS includes: - Model-specific bracket with mounting parts - AKRON-RS license plate mounting plate - Adjustable turn signal brackets - E-tested reflector with adjustable bracket - Mounting instructions Note:The special turn signal bracket 280-979 is optionally available for the original turn signals． Tip: If you have not found a model-specific license plate holder for your vehicle， the universal license plate holders from HIGHSIDER， which are available in many different designs， are certainly a good alternative．■注意点※ナンバープレートサイズが日本の規格ではありませんので、取り付ける際にはステーによる加工などが必要なりますのでご注意下さい。※輸入品のため、説明書が付属する場合、外国語の説明書となります。※メーカー都合により商品の仕様変更がある場合がございます。ご了承ください。 ※画像はイメージです。■適合車種CB 125 R NEO SPORT CAFE ABS (JC79) CB 125 R NEO SPORT CAFE ABS (JC79) 年式: 18-21 ■商品番号1108180 | 16,529円 |
 Highsider ハイサイダー Akron-XL ハンドルバーウエイト ウェビック 楽天市場店 | ■商品概要【メーカー品番】161-0571標準カラー：シルバー■詳細説明HIGHSIDER AKRON-XS motorcycle Bar End Weights- Styling for your bike -With these nobly designed handlebar ends you can design your bike in detail according to your ideas． Handlebar ends also serve to reduce annoying vibrations on the handlebars． Thanks to clamping system with different sleeves universal suitable for 7/8 (Φ22 mm)， 1 inch (Φ25，4 mm) or X-Bar (Φ28，6 mm) tube handlebars with an inner diameter from 12 to 22 mm．Our accessories TIP:Excellent in combination with the visually coordinated design LENKERGRIFFGUMMIS from our own house． The caps of the handlebar ends mirror the design of the grip rubbers and make your motorcycle cockpit an eye-catcher．Precisely matched - the extensive range of accessories from HIGHSIDER is perfectly tailored to your motorcycle． With a maximum of quality and functionality you can easily design your bike according to your wishes．Dimensions:Stem weightΦ: 37，4 mmWidth: 17 mmScope of supply: 1 pair incl．2 clamping sleeves each with D． 12 mm and D． 16 mm2 spacer sleeves each with D． 14 mm， D． 18 mm and D． 21 mm2 x M6 central screws2 x M6 cone nutsNOTE:For Bar End Weights with clamping system， the ends of the handlebars must not be blocked by threaded inserts or similar．Steering ends do not have to be approved， therefore do not require any test marks， certificates or ABEs．■注意点※輸入品のため、説明書が付属する場合、外国語の説明書となります。※メーカー都合により商品の仕様変更がある場合がございます。ご了承ください。 ※画像はイメージです。■商品番号1108559002 | 7,657円 |
 Highsider ハイサイダー Akron-RS ナンバープレートホルダー (ライト なし) 701 ENDURO 701 ENDURO LR 701 SUPERMOTO ウェビック 楽天市場店 | ■商品概要【メーカー品番】280-691H■詳細説明HIGHSIDER AKRON-RS license plate holderThe HIGHSIDER AKRON-RS license plate holder adapts perfectly to the lines of your bike thanks to its design．The model-specific bracket of the HIGHSIDER AKRON-RS allows mounting on the original mounting points of your bike and thus a replacement without further drilling or cutting． To prevent damage to cables， all sharp-edged feedthroughs are protected by a rubber membrane grommet． The license plate is made of sheet steel and 2 mm thick． The precise cutting is done by laser． After edging， the weather-resistant black powder coating is applied．This ensures the optimal fit and durability．Through the stepless adjustment you can bring the plate without drilling in the desired position． To keep the plate in this position， there is an additional locking screw．The turn signal brackets of the HIGHSIDER AKRON-RS are adjustable in width and therefore suitable for any type of accessory turn signal． This adjustment option allows you to adapt the position for your turn signals to the most varied number plates． To allow mounting the turn signals without disconnecting them from the wiring harness， the 10 mm holes are slotted to the side．You can also adjust the position of the reflector individually via a slider． An adaptation to the different designs of the EU license plates is therefore no problem．To screw the license plate securely and reduce vibration， two rubber washers are included． Another rubber buffer supports the license plate on its underside．Details: - model-specific bracket - infinitely adjustable turn signal holder - slotted turn signal holder for easy mounting without cable separation - infinitely adjustable reflector， E-approved - suitable for European number plates - infinitely adjustable tilt angle - additional screw for optimum position security - easy fixing without further work steps (e． g．B． Drilling) - easy mounting of the license plate through slotted holesIncluded in the scope of delivery of the HIGHSIDER AKRON-RS are: - Model-specific bracket with mounting parts - HIGHSIDER AKRON-RS license plate retaining plate - Adjustable turn signal brackets - E-tested reflector with adjustable bracket - Mounting instructions Tip: Should you not have found a model-specific license plate holder for your vehicle， the universal license plate holders from HIGHSIDER， which are available in many different designs， are certainly a good alternative．Note: If side reflectors are fitted to your original number plate holder， these must be refitted in a suitable position or replaced with new ones．■注意点※ナンバープレートサイズが日本の規格ではありませんので、取り付ける際にはステーによる加工などが必要なりますのでご注意下さい。※輸入品のため、説明書が付属する場合、外国語の説明書となります。※メーカー都合により商品の仕様変更がある場合がございます。ご了承ください。 ※画像はイメージです。■適合車種701 ENDURO 701 ENDURO 年式: 16-20 701 ENDURO LR 701 ENDURO LR 年式: 20 701 SUPERMOTO 701 SUPERMOTO 年式: 16-21 ■商品番号1108191 | 14,469円 |
 Highsider ハイサイダー Akron-RS プロ ナンバープレートホルダー ウェビック 楽天市場店 | ■商品概要【メーカー品番】280-164HPカラー：ブラック認証：CE 認証素材：スチール■詳細説明The HIGHSIDER AKRON-RS license plate holder fits perfectly on your motorcycle thanks to its attractive design．The license plate holder is model specific and allows easy mounting on the original mountings without any modifications．Made of 2mm steel and laser cut， the holder has a weather resistant coating．Fully adjustable， you can adjust the holder to the desired position． An additional locking screw ensures that it stays in place．The AKRON-RS turn signal holders are adjustable in width and are therefore suitable for all types of turn signals． This adjustment option allows you to adapt the position of your turn signals to the most diverse license plates． The 10 mm holes are on the side to allow the indicators to be mounted without disconnecting them from the wiring harness．The PRO version of the HIGHSIDER AKRON-RS includes a high-quality aluminum license plate light with mounting plate and support arm． The bracket is height-adjustable and designed for an homolgated mounting．Adjustable reflector， E-approvedSuitable for European license platesAdjustable angle of inclinationAdditional screw for optimal positional safetyEasy mounting without additional drillingEasy mounting of the license plateAdjustable plate light included， holder included■注意点※ナンバープレートサイズが日本の規格ではありませんので、取り付ける際にはステーによる加工などが必要なりますのでご注意下さい。※輸入品のため、説明書が付属する場合、外国語の説明書となります。※メーカー都合により商品の仕様変更がある場合がございます。ご了承ください。 ※画像はイメージです。■商品番号1111152 | 20,649円 |
 Highsider ハイサイダー Akron-RS プロ ナンバープレートホルダー R NineT ウェビック 楽天市場店 | ■商品概要【メーカー品番】280-103HPカラー：ブラック認証：CE 認証素材：スチール■詳細説明The HIGHSIDER AKRON-RS license plate holder fits perfectly on your motorcycle thanks to its attractive design．The license plate holder is model specific and allows easy mounting on the original mountings without any modifications．Made of 2mm steel and laser cut， the holder has a weather resistant coating．Fully adjustable， you can adjust the holder to the desired position． An additional locking screw ensures that it stays in place．The AKRON-RS turn signal holders are adjustable in width and are therefore suitable for all types of turn signals． This adjustment option allows you to adapt the position of your turn signals to the most diverse license plates． The 10 mm holes are on the side to allow the indicators to be mounted without disconnecting them from the wiring harness．The PRO version of the HIGHSIDER AKRON-RS includes a high-quality aluminum license plate light with mounting plate and support arm． The bracket is height-adjustable and designed for an homolgated mounting．Adjustable reflector， E-approvedSuitable for European license platesAdjustable angle of inclinationAdditional screw for optimal positional safetyEasy mounting without additional drillingEasy mounting of the license plateAdjustable plate light included， holder included■注意点※ナンバープレートサイズが日本の規格ではありませんので、取り付ける際にはステーによる加工などが必要なりますのでご注意下さい。※輸入品のため、説明書が付属する場合、外国語の説明書となります。※メーカー都合により商品の仕様変更がある場合がございます。ご了承ください。 ※画像はイメージです。■適合車種R NineT R NineT ■商品番号1111123 | 25,572円 |
 Highsider ハイサイダー Akron-RS ナンバープレートホルダー (ライト なし) NINJA 400 ABS (EX400G) NINJA 400 ABS KRT EDITION (EX400G) NINJA 400 ABS SPECIAL EDITION (EX400G) ウェビック 楽天市場店 | ■商品概要【メーカー品番】280-727H■詳細説明HIGHSIDER AKRON-RS license plate holderThe HIGHSIDER AKRON-RS license plate holder adapts perfectly to the lines of your bike thanks to its design．The model-specific bracket of the HIGHSIDER AKRON-RS allows mounting on the original mounting points of your bike and thus a replacement without further drilling or cutting． To prevent damage to cables， all sharp-edged feedthroughs are protected by a rubber membrane grommet． The license plate is made of sheet steel and 2 mm thick． The precise cutting is done by laser． After edging， the weather-resistant black powder coating is applied．This ensures the optimal fit and durability．Through the stepless adjustment you can bring the plate without drilling in the desired position． To keep the plate in this position， there is an additional locking screw．The turn signal brackets of the HIGHSIDER AKRON-RS are adjustable in width and therefore suitable for any type of accessory turn signal． This adjustment option allows you to adapt the position for your turn signals to the most varied number plates． To allow mounting the turn signals without disconnecting them from the wiring harness， the 10 mm holes are slotted to the side．You can also adjust the position of the reflector individually via a slider． An adaptation to the different designs of the EU license plates is therefore no problem．To screw the license plate securely and reduce vibration， two rubber washers are included． Another rubber buffer supports the license plate on its underside．Details: - model-specific bracket - infinitely adjustable turn signal holder - slotted turn signal holder for easy mounting without cable separation - infinitely adjustable reflector， E-approved - suitable for European number plates - infinitely adjustable tilt angle - additional screw for optimum position security - easy fixing without further work steps (e． g．B． Drilling) - easy mounting of the license plate through slotted holesIncluded in the scope of delivery of the HIGHSIDER AKRON-RS are: - Model-related bracket with mounting parts - HIGHSIDER AKRON-RS license plate retaining plate - Adjustable turn signal brackets - E-tested reflector with adjustable bracket - Mounting instructions Notes: - If there are side reflectors fitted to your original number plate holder， these must be refitted in a suitable position or replaced with new ones． - The special turn signal holder 280-974 is optionally available for the original turn signals． Tip: If you have not found a model-specific license plate holder for your vehicle， the universal license plate holders from HIGHSIDER， which are available in many different designs， are certainly a good alternative．■注意点※ナンバープレートサイズが日本の規格ではありませんので、取り付ける際にはステーによる加工などが必要なりますのでご注意下さい。※輸入品のため、説明書が付属する場合、外国語の説明書となります。※メーカー都合により商品の仕様変更がある場合がございます。ご了承ください。 ※画像はイメージです。■適合車種NINJA 400 ABS (EX400G) NINJA 400 ABS (EX400G) 年式: 18 NINJA 400 ABS KRT EDITION (EX400G) NINJA 400 ABS KRT EDITION (EX400G) 年式: 18-21 NINJA 400 ABS SPECIAL EDITION (EX400G) NINJA 400 ABS SPECIAL EDITION (EX400G) 年式: 19-20 ■商品番号1108252 | 14,469円 |
 Highsider ハイサイダー Akron-RS ナンバープレートホルダー (ライト なし) SV 650 ABS SV 650 X ABS ウェビック 楽天市場店 | ■商品概要【メーカー品番】280-820H■詳細説明HIGHSIDER AKRON-RS license plate holderThe HIGHSIDER AKRON-RS license plate holder adapts perfectly to the lines of your bike thanks to its design．The model-specific bracket of the AKRON-RS allows mounting on the original mounting points of your bike and thus a replacement without further drilling or cutting． To prevent damage to cables， all sharp-edged feedthroughs are protected by a rubber membrane grommet． The license plate is made of sheet steel and 2 mm thick． The precise cutting is done by laser． After edging， the weather-resistant black powder coating is applied．This ensures the optimal fit and durability．Through the stepless adjustment you can bring the plate without drilling in the desired position． To keep the plate in this position， there is an additional locking screw．The AKRON-RS turn signal brackets are adjustable in width and therefore suitable for any type of accessory turn signal． This adjustment option allows you to adapt the position for your turn signals to the most varied number plates． To allow mounting the turn signals without disconnecting them from the wiring harness， the 10 mm holes are slotted to the side．You can also adjust the position of the reflector individually via a slider． An adaptation to the different designs of the EU license plates is therefore no problem．To screw the license plate securely and reduce vibration， two rubber washers are included． Another rubber buffer supports the license plate on its underside．Details: - model-specific bracket - infinitely adjustable turn signal holder - slotted turn signal holder for easy mounting without cable separation - infinitely adjustable reflector， E-approved - suitable for European number plates - infinitely adjustable tilt angle - additional screw for optimum position security - easy fixing without further work steps (e． g．B． Drilling) - easy mounting of the license plate through slotted holesThe scope of delivery of the AKRON-RS includes: - Model-specific bracket with mounting parts - AKRON-RS license plate mounting plate - Adjustable turn signal brackets - E-tested reflector with adjustable bracket - Mounting instructions Note:The special turn signal bracket 280-976 is optionally available for the original turn signals． Tip: If you have not found a model-specific license plate holder for your vehicle， the universal license plate holders from HIGHSIDER， which are available in many different designs， are certainly a good alternative．■注意点※ナンバープレートサイズが日本の規格ではありませんので、取り付ける際にはステーによる加工などが必要なりますのでご注意下さい。※輸入品のため、説明書が付属する場合、外国語の説明書となります。※メーカー都合により商品の仕様変更がある場合がございます。ご了承ください。 ※画像はイメージです。■適合車種SV 650 ABS SV 650 ABS 年式: 17-21 SV 650 X ABS SV 650 X ABS 年式: 18-21 ■商品番号1108286 | 14,469円 |
 Highsider ハイサイダー Akron-RS ナンバープレートホルダー (ライト なし) GSX-S 1000 GSX-S 1000 ABS GSX-S 1000 ABS SPECIAL EDITION EVO GSX-S 1000 F GSX-S 1000 F ABS ウェビック 楽天市場店 | ■商品概要【メーカー品番】280-819H■詳細説明HIGHSIDER AKRON-RS license plate holderThe HIGHSIDER AKRON-RS license plate holder adapts perfectly to the lines of your bike thanks to its design．The model-specific bracket of the AKRON-RS allows mounting on the original mounting points of your bike and thus a replacement without further drilling or cutting． To prevent damage to cables， all sharp-edged feedthroughs are protected by a rubber membrane grommet． The license plate is made of sheet steel and 2 mm thick． The precise cutting is done by laser． After edging， the weather-resistant black powder coating is applied．This ensures the optimal fit and durability．Through the stepless adjustment you can bring the plate without drilling in the desired position． To keep the plate in this position， there is an additional locking screw．The AKRON-RS turn signal brackets are adjustable in width and therefore suitable for any type of accessory turn signal． This adjustment option allows you to adapt the position for your turn signals to the most varied number plates． To allow mounting the turn signals without disconnecting them from the wiring harness， the 10 mm holes are slotted to the side．You can also adjust the position of the reflector individually via a slider． An adaptation to the different designs of the EU license plates is therefore no problem．To screw the license plate securely and reduce vibration， two rubber washers are included． Another rubber buffer supports the license plate on its underside．Details: - model-specific bracket - infinitely adjustable turn signal holder - slotted turn signal holder for easy mounting without cable separation - infinitely adjustable reflector， E-approved - suitable for European number plates - infinitely adjustable tilt angle - additional screw for optimum position security - easy fixing without further work steps (e． g．B． Drilling) - easy mounting of the license plate through slotted holesThe scope of delivery of the AKRON-RS includes: - Model-specific bracket with mounting parts - AKRON-RS license plate mounting plate - Adjustable turn signal brackets - E-tested reflector with adjustable bracket - Mounting instructions Note:The special turn signal bracket 280-976 is optionally available for the original turn signals． Tip: If you have not found a model-specific license plate holder for your vehicle， the universal license plate holders from HIGHSIDER， which are available in many different designs， are certainly a good alternative．■注意点※ナンバープレートサイズが日本の規格ではありませんので、取り付ける際にはステーによる加工などが必要なりますのでご注意下さい。※輸入品のため、説明書が付属する場合、外国語の説明書となります。※メーカー都合により商品の仕様変更がある場合がございます。ご了承ください。 ※画像はイメージです。■適合車種GSX-S 1000 GSX-S 1000 年式: 16 GSX-S 1000 ABS GSX-S 1000 ABS 年式: 15-21 GSX-S 1000 ABS SPECIAL EDITION EVO GSX-S 1000 ABS SPECIAL EDITION EVO 年式: 18-20 GSX-S 1000 F GSX-S 1000 F 年式: 16 GSX-S 1000 F ABS GSX-S 1000 F ABS 年式: 16-21 ■商品番号1108284 | 14,469円 |
 Highsider ハイサイダー Akron-RS ナンバープレートホルダー (ライト なし) CB 650 R NEO SPORTS CAFE (RH02) ウェビック 楽天市場店 | ■商品概要【メーカー品番】280-618H■詳細説明HIGHSIDER AKRON-RS license plate holderThe HIGHSIDER AKRON-RS license plate holder adapts perfectly to the lines of your bike thanks to its design．The model-specific bracket of the AKRON-RS allows mounting on the original mounting points of your bike and thus a replacement without further drilling or cutting． To prevent damage to cables， all sharp-edged feedthroughs are protected by a rubber membrane grommet． The license plate is made of sheet steel and 2 mm thick． The precise cutting is done by laser． After edging， the weather-resistant black powder coating is applied．This ensures the optimal fit and durability．Through the stepless adjustment you can bring the plate without drilling in the desired position． To keep the plate in this position， there is an additional locking screw．The AKRON-RS turn signal brackets are adjustable in width and therefore suitable for any type of accessory turn signal． This adjustment option allows you to adapt the position for your turn signals to the most varied number plates． To allow mounting the turn signals without disconnecting them from the wiring harness， the 10 mm holes are slotted to the side．You can also adjust the position of the reflector individually via a slider． An adaptation to the different designs of the EU license plates is therefore no problem．To screw the license plate securely and reduce vibration， two rubber washers are included． Another rubber buffer supports the license plate on its underside．Details: - model-specific bracket - infinitely adjustable turn signal holder - slotted turn signal holder for easy mounting without cable separation - infinitely adjustable reflector， E-approved - suitable for European number plates - infinitely adjustable tilt angle - additional screw for optimum position security - easy fixing without further work steps (e． g．B． Drilling) - easy mounting of the license plate through slotted holesThe scope of delivery of the AKRON-RS includes: - Model-specific bracket with mounting parts - AKRON-RS license plate mounting plate - Adjustable turn signal brackets - E-tested reflector with adjustable bracket - Mounting instructions Note:The special turn signal bracket 280-979 is optionally available for the original turn signals． Tip: If you have not found a model-specific license plate holder for your vehicle， the universal license plate holders from HIGHSIDER， which are available in many different designs， are certainly a good alternative．■注意点※ナンバープレートサイズが日本の規格ではありませんので、取り付ける際にはステーによる加工などが必要なりますのでご注意下さい。※輸入品のため、説明書が付属する場合、外国語の説明書となります。※メーカー都合により商品の仕様変更がある場合がございます。ご了承ください。 ※画像はイメージです。■適合車種CB 650 R NEO SPORTS CAFE (RH02) CB 650 R NEO SPORTS CAFE (RH02) 年式: 19-21 ■商品番号1108187 | 16,529円 |
 Highsider ハイサイダー Akron-RS ナンバープレートホルダー (ライト なし) NINJA ZX-6 R (ZX636B) NINJA ZX-6 RR (ZX600K) NINJA ZX-6 RR (ZX600M) Z 1000 (ZR1000A) Z 750 (Z750J) Z 750 S (Z750K) ウェビック 楽天市場店 | ■商品概要【メーカー品番】280-707H■詳細説明HIGHSIDER AKRON-RS license plate holderThe HIGHSIDER AKRON-RS license plate holder adapts perfectly to the lines of your bike thanks to its design．The model-specific bracket of the AKRON-RS allows mounting on the original mounting points of your bike and thus a replacement without further drilling or cutting． To prevent damage to cables， all sharp-edged feedthroughs are protected by a rubber membrane grommet． The license plate is made of sheet steel and 2 mm thick． The precise cutting is done by laser． After edging， the weather-resistant black powder coating is applied．This ensures the optimal fit and durability．Through the stepless adjustment you can bring the plate without drilling in the desired position． To keep the plate in this position， there is an additional locking screw．The AKRON-RS turn signal brackets are adjustable in width and therefore suitable for any type of accessory turn signal． This adjustment option allows you to adapt the position for your turn signals to the most varied number plates． To allow mounting the turn signals without disconnecting them from the wiring harness， the 10 mm holes are slotted to the side．You can also adjust the position of the reflector individually via a slider． An adaptation to the different designs of the EU license plates is therefore no problem．To screw the license plate securely and reduce vibration， two rubber washers are included． Another rubber buffer supports the license plate on its underside．Details: - model-specific bracket - infinitely adjustable turn signal holder - slotted turn signal holder for easy mounting without cable separation - infinitely adjustable reflector， E-approved - suitable for European number plates - infinitely adjustable tilt angle - additional screw for optimum position security - easy fixing without further work steps (e． g．B． Drilling) - easy mounting of the license plate through slotted holesThe scope of delivery of the AKRON-RS includes: - Model-specific bracket with mounting parts - AKRON-RS license plate mounting plate - Adjustable turn signal brackets - E-tested reflector with adjustable bracket - Mounting instructions Note:The special turn signal bracket 280-974 is optionally available for the original turn signals． Tips: If you have not found a model-specific license plate holder for your vehicle， then you will certainly find the universal license plate holders from HIGHSIDER， which are available in many different designs．■注意点※ナンバープレートサイズが日本の規格ではありませんので、取り付ける際にはステーによる加工などが必要なりますのでご注意下さい。※輸入品のため、説明書が付属する場合、外国語の説明書となります。※メーカー都合により商品の仕様変更がある場合がございます。ご了承ください。 ※画像はイメージです。■適合車種NINJA ZX-6 R (ZX636B) NINJA ZX-6 R (ZX636B) 年式: 03-04 NINJA ZX-6 RR (ZX600K) NINJA ZX-6 RR (ZX600K) 年式: 03 NINJA ZX-6 RR (ZX600M) NINJA ZX-6 RR (ZX600M) 年式: 04 Z 1000 (ZR1000A) Z 1000 (ZR1000A) 年式: 03-06 Z 750 (Z750J) Z 750 (Z750J) 年式: 04-06 Z 750 S (Z750K) Z 750 S (Z750K) 年式: 05-06 ■商品番号1108210 | 14,469円 |
 Highsider ハイサイダー Akron-RS ナンバープレートホルダー 800 SS SUPERSPORT SUPERSPORT SUPERSPORT S ウェビック 楽天市場店 | ■商品概要【メーカー品番】280-162Hカラー：ブラック認証：CE 認証素材：スチール■詳細説明The HIGHSIDER AKRON-RS license plate holder fits perfectly on your motorcycle thanks to its attractive design．The license plate holder is model specific and allows easy mounting on the original mountings without any modifications．Made of 2mm steel and laser cut， the holder has a weather resistant coating．Fully adjustable， you can adjust the holder to the desired position． An additional locking screw ensures that it stays in place．The AKRON-RS turn signal holders are adjustable in width and are therefore suitable for all types of turn signals． This adjustment option allows you to adapt the position of your turn signals to the most diverse license plates． The 10 mm holes are on the side to allow the indicators to be mounted without disconnecting them from the wiring harness．Adjustable reflector， E-approvedSuitable for European license platesAdjustable angle of inclinationAdditional screw for optimal positional safetyEasy mounting without additional drillingEasy mounting of the license plate■注意点※ナンバープレートサイズが日本の規格ではありませんので、取り付ける際にはステーによる加工などが必要なりますのでご注意下さい。※輸入品のため、説明書が付属する場合、外国語の説明書となります。※メーカー都合により商品の仕様変更がある場合がございます。ご了承ください。 ※画像はイメージです。■適合車種800 SS SUPERSPORT 800 SS SUPERSPORT 年式: 07 SUPERSPORT SUPERSPORT 年式: 17-21 SUPERSPORT S SUPERSPORT S 年式: 17-21 ■商品番号1111128 | 18,588円 |
 Highsider ハイサイダー Akron-RS プロ ナンバープレートホルダー MT-07 ウェビック 楽天市場店 | ■商品概要【メーカー品番】280-913HP■詳細説明HIGHSIDER AKRON-RS PRO license plate holder incl． license plate lightThe HIGHSIDER AKRON-RS PRO license plate holder adapts perfectly to the lines of your bike thanks to its design．The model-specific bracket of the HIGHSIDER AKRON-RS PRO allows mounting on the original mounting points of your bike and thus a replacement without further drilling or cutting． To prevent damage to cables， all sharp-edged feedthroughs are protected by a rubber membrane grommet． The license plate is made of sheet steel and 2 mm thick． The precise cutting is done by laser． After edging， the weather-resistant black powder coating is applied．This ensures the optimal fit and durability．Through the stepless adjustment you can bring the plate without drilling in the desired position． To keep the plate in this position， there is an additional locking screw．The turn signal brackets on the HIGHSIDER AKRON-RS PRO are adjustable in width， making them suitable for any type of accessory turn signal． This adjustment option allows you to adapt the position for your turn signals to the most varied number plates． To allow mounting the turn signals without disconnecting them from the wiring harness， the 10 mm holes are slotted to the side．You can also adjust the position of the reflector individually via a slider． An adaptation to the different designs of the EU license plates is therefore no problem．To screw the license plate securely and reduce vibration， two rubber washers are included． Another rubber buffer supports the license plate on its underside．Included in this PRO version of the HIGHSIDER AKRON-RS is the very small HIGHSIDER license plate light machined from high quality aluminum with mounting plate and support arm． The bracket is adjustable in height and designed to allow mounting in the legally required position．Details: - model-specific bracket - infinitely adjustable turn signal holder - slotted turn signal holder for easy mounting without cable separation - infinitely adjustable reflector， E-approved - suitable for European number plates - infinitely adjustable tilt angle - additional screw for optimum position security - easy fixation without further work steps (eg．e．g． drilling) - easy mounting of the license plate through slotted holes - license plate light incl． Holder included - license plate light， E-approved - infinitely adjustable license plate light - many different options for mounting the license plate light The scope of delivery of the HIGHSIDER AKRON-RS PRO includes: - Model specific bracket with mounting hardware - HIGHSIDER AKRON-RS license plate retainer plate - Adjustable turn signal brackets - E-tested reflector with adjustable bracket - E-tested license plate light - Mounting instructions Notes: - If there are side reflectors fitted to your original number plate holder， these must be refitted in a suitable position or replaced with new ones． - For the original turn signals the special turn signal holder 280-984 is optionally available． Tip: If you have not found a model-specific license plate holder for your vehicle， the universal license plate holders from HIGHSIDER， which are available in many different designs， are certainly a good alternative．■注意点※ナンバープレートサイズが日本の規格ではありませんので、取り付ける際にはステーによる加工などが必要なりますのでご注意下さい。※輸入品のため、説明書が付属する場合、外国語の説明書となります。※メーカー都合により商品の仕様変更がある場合がございます。ご了承ください。 ※画像はイメージです。■適合車種MT-07 MT-07 ■商品番号1108317 | 18,588円 |
 Highsider ハイサイダー Akron-RS ナンバープレートホルダー (ライト なし) YZF-R6 (RJ27) ウェビック 楽天市場店 | ■商品概要【メーカー品番】280-922H■詳細説明HIGHSIDER AKRON-RS license plate holder The HIGHSIDER AKRON-RS license plate holder adapts perfectly to the lines of your bike with its design．The model-specific bracket of the HIGHSIDER AKRON-RS allows mounting on the original mounting points of your bike and thus a replacement without further drilling or cutting． To prevent damage to cables， all sharp-edged feedthroughs are protected by a rubber membrane grommet． The license plate is made of sheet steel and 2 mm thick． The precise cutting is done by laser． After edging， the weather-resistant black powder coating is applied．This ensures the optimal fit and durability．Through the stepless adjustment you can bring the plate without drilling in the desired position． To keep the plate in this position， there is an additional locking screw．The turn signal brackets of the HIGHSIDER AKRON-RS are adjustable in width and therefore suitable for any type of accessory turn signal． This adjustment option allows you to adapt the position for your turn signals to the most varied number plates． To allow mounting the turn signals without disconnecting them from the wiring harness， the 10 mm holes are slotted to the side．You can also adjust the position of the reflector individually via a slider． An adaptation to the different designs of the EU license plates is therefore no problem．To screw the license plate securely and reduce vibration， two rubber washers are included． Another rubber buffer supports the license plate on its underside．Details: - model-specific bracket - infinitely adjustable turn signal holder - slotted turn signal holder for easy mounting without cable separation - infinitely adjustable reflector， E-approved - suitable for European license plates - infinitely adjustable tilt angle - additional screw for optimum position security - easy fixation without further work steps (eg． Drilling) - easy mounting of the license plate through slotted holesIncluded in the scope of delivery of the HIGHSIDER AKRON-RS are: - Model-specific bracket with mounting parts - HIGHSIDER AKRON-RS license plate retaining plate - Adjustable turn signal holders - E-tested reflector with adjustable holder - Mounting instructions Notes: - A special turn signal holder is optionally available for the original turn signals in the accessories tab． - If your original number plate holder has reflectors fitted to the side， these must be refitted in a suitable position or replaced with new ones． Tips: If you have not found a model-specific license plate holder for your vehicle， the universal license plate holders from HIGHSIDER， which are available in many different designs， are certainly a good alternative．■注意点※ナンバープレートサイズが日本の規格ではありませんので、取り付ける際にはステーによる加工などが必要なりますのでご注意下さい。※輸入品のため、説明書が付属する場合、外国語の説明書となります。※メーカー都合により商品の仕様変更がある場合がございます。ご了承ください。 ※画像はイメージです。■適合車種YZF-R6 (RJ27) YZF-R6 (RJ27) 年式: 17-21 ■商品番号1108333 | 14,469円 |
 Highsider ハイサイダー Akron-RS ナンバープレートホルダー (ライト なし) MT-07 MT-07 (RM04) MT-07 ABS (RM04) MT-07 ABS (RM17RM18) MT-07 MOTO CAGE (RM04) MT-07 MOTO CAGE ABS (RM04) ウェビック 楽天市場店 | ■商品概要【メーカー品番】280-913H■詳細説明HIGHSIDER AKRON-RS license plate holderThe HIGHSIDER AKRON-RS license plate holder adapts perfectly to the lines of your bike thanks to its design．The model-specific bracket of the HIGHSIDER AKRON-RS allows mounting on the original mounting points of your bike and thus a replacement without further drilling or cutting． To prevent damage to cables， all sharp-edged feedthroughs are protected by a rubber membrane grommet． The license plate is made of sheet steel and 2 mm thick． The precise cutting is done by laser． After edging， the weather-resistant black powder coating is applied．This ensures the optimal fit and durability．Through the stepless adjustment you can bring the plate without drilling in the desired position． To keep the plate in this position， there is an additional locking screw．The turn signal brackets of the HIGHSIDER AKRON-RS are adjustable in width and therefore suitable for any type of accessory turn signal． This adjustment option allows you to adapt the position for your turn signals to the most varied number plates． To allow mounting the turn signals without disconnecting them from the wiring harness， the 10 mm holes are slotted to the side．You can also adjust the position of the reflector individually via a slider． An adaptation to the different designs of the EU license plates is therefore no problem．To screw the license plate securely and reduce vibration， two rubber washers are included． Another rubber buffer supports the license plate on its underside．Details: - model-specific bracket - infinitely adjustable turn signal holder - slotted turn signal holder for easy mounting without cable separation - infinitely adjustable reflector， E-approved - suitable for European number plates - infinitely adjustable tilt angle - additional screw for optimum position security - easy fixation without further work steps (e． g．B． Drilling) - easy mounting of the license plate through slotted holesIncluded in the scope of delivery of the HIGHSIDER AKRON-RS are: - Model-related bracket with mounting parts - HIGHSIDER AKRON-RS license plate retaining plate - Adjustable turn signal brackets - E-tested reflector with adjustable bracket - Mounting instructions Notes: - If there are side reflectors fitted to your original number plate holder， these must be refitted in a suitable position or replaced with new ones． - For the original turn signals the special turn signal holder 280-984 is optionally available． Tip: If you have not found a model-specific license plate holder for your vehicle， the universal license plate holders from HIGHSIDER， which are available in many different designs， are certainly a good alternative．■注意点※ナンバープレートサイズが日本の規格ではありませんので、取り付ける際にはステーによる加工などが必要なりますのでご注意下さい。※輸入品のため、説明書が付属する場合、外国語の説明書となります。※メーカー都合により商品の仕様変更がある場合がございます。ご了承ください。 ※画像はイメージです。■適合車種MT-07 MT-07 年式: 21 MT-07 (RM04) MT-07 (RM04) 年式: 14-16 MT-07 ABS (RM04) MT-07 ABS (RM04) 年式: 14-16 MT-07 ABS (RM17RM18) MT-07 ABS (RM17RM18) 年式: 17-20 MT-07 MOTO CAGE (RM04) MT-07 MOTO CAGE (RM04) 年式: 14-16 MT-07 MOTO CAGE ABS (RM04) MT-07 MOTO CAGE ABS (RM04) 年式: 14-16 ■商品番号1108316 | 14,469円 |
 Highsider ハイサイダー Akron-LS バーエンド ウェビック 楽天市場店 | ■商品概要【メーカー品番】161-0593標準カラー：マットチタン■詳細説明HIGHSIDER AKRON-LS Bar End Weights， black with cap in different colors- Styling for your bike -With these nobly designed Bar End Weights with handlebar end mirror receptacle， you can design your bike in detail according to your ideas． These end pieces are used for all HIGHSIDER & SHIN YO handlebar end mirrors with handlebar outer clamp． Handlebar ends also serve to reduce annoying vibrations on the handlebars． Thanks to clamping system with different sleeves universal suitable for 7/8 (Φ22 mm)， 1 inch (Φ25，4 mm) or X-Bar (Φ28，6 mm) tube handlebars with an inner diameter from 12 to 22 mm．Our accessories TIP:Excellent in combination with the visually coordinated design LENKERGRIFFGUMMIS AKRON from our own house． The caps of the handlebar ends mirror the design of the grip rubbers and make your motorcycle cockpit an eye-catcher． If you do want to switch back to handlebar mirrors， you can easily use the optionally available coloured rings instead of a handlebar end mirror and thus add further colour accents． The colour rings are simply pushed over the end of the handlebar and fastened with the grub screw located on the ring．Precisely matched - the extensive range of accessories from HIGHSIDER is perfectly tailored to your motorcycle． With a maximum of quality and functionality you can easily design your bike according to your wishes．Dimensions:Bar End WeightsΦ: 37，4 mmWidth: 29 mmMount for mirror: Φ 29，90 mm， Width: 12 mmScope of delivery: 1 pair incl．Each 2 clamping sleeves with D． 12 mm and D． 16 mmEach 2 spacer sleeves with D． 14 mm， D． 18 mm and D． 21 mm2 x M6 central screws2 x M6 cone nutsNOTE:For Bar End Weights with clamping system， the ends of the handlebars must not be blocked by threaded inserts or similar．Steering ends do not have to be approved， therefore do not require any test marks， certificates or ABEs．■注意点※輸入品のため、説明書が付属する場合、外国語の説明書となります。※メーカー都合により商品の仕様変更がある場合がございます。ご了承ください。 ※画像はイメージです。■商品番号1108561004 | 7,657円 |
 Highsider ハイサイダー Akron-RS ナンバープレートホルダー (ライト なし) ウェビック 楽天市場店 | ■商品概要【メーカー品番】280-905H■詳細説明HIGHSIDER AKRON-RS license plate holderThe HIGHSIDER AKRON-RS license plate holder adapts perfectly to the lines of your bike thanks to its design．The model-specific bracket of the AKRON-RS allows mounting on the original mounting points of your bike and thus a replacement without further drilling or cutting． To prevent damage to cables， all sharp-edged feedthroughs are protected by a rubber membrane grommet． The license plate is made of sheet steel and 2 mm thick． The precise cutting is done by laser． After edging， the weather-resistant black powder coating is applied．This ensures the optimal fit and durability．Through the stepless adjustment you can bring the plate without drilling in the desired position． To keep the plate in this position， there is an additional locking screw．The AKRON-RS turn signal brackets are adjustable in width and therefore suitable for any type of accessory turn signal． This adjustment option allows you to adapt the position for your turn signals to the most varied number plates． To allow mounting the turn signals without disconnecting them from the wiring harness， the 10 mm holes are slotted to the side．You can also adjust the position of the reflector individually via a slider． An adaptation to the different designs of the EU license plates is therefore no problem．To screw the license plate securely and reduce vibration， two rubber washers are included． Another rubber buffer supports the license plate on its underside．Details: - model-specific bracket - infinitely adjustable turn signal holder - slotted turn signal holder for easy mounting without cable separation - infinitely adjustable reflector， E-approved - suitable for European number plates - infinitely adjustable tilt angle - additional screw for optimum position security - easy fixing without further work steps (e． g．B． Drilling) - easy mounting of the license plate through slotted holesThe scope of delivery of the AKRON-RS includes: - Model-specific bracket with mounting parts - AKRON-RS license plate mounting plate - Adjustable turn signal brackets - E-tested reflector with adjustable bracket - Mounting instructions Note:The special turn signal bracket 280-977 is optionally available for the original turn signals． Tip: If you have not found a model-specific license plate holder for your vehicle， the universal license plate holders from HIGHSIDER， which are available in many different designs， are certainly a good alternative．■注意点※ナンバープレートサイズが日本の規格ではありませんので、取り付ける際にはステーによる加工などが必要なりますのでご注意下さい。※輸入品のため、説明書が付属する場合、外国語の説明書となります。※メーカー都合により商品の仕様変更がある場合がございます。ご了承ください。 ※画像はイメージです。■商品番号1108307 | 14,469円 |
 Highsider ハイサイダー Akron-RS ナンバープレートホルダー (ライト なし) 690 ENDURO 690 ENDURO R 690 SUPERMOTO 690 SUPERMOTO SMC 690 SUPERMOTO SMC R 690 SUPERMOTO SMR 690 SUPERMOTO SPECIAL EDITION ウェビック 楽天市場店 | ■商品概要【メーカー品番】280-301H■詳細説明HIGHSIDER AKRON-RS license plate holderThe HIGHSIDER AKRON-RS license plate holder adapts perfectly to the lines of your bike thanks to its design．The model-specific bracket of the AKRON-RS allows mounting on the original mounting points of your bike and thus a replacement without further drilling or cutting． To prevent damage to cables， all sharp-edged feedthroughs are protected by a rubber membrane grommet． The license plate is made of sheet steel and 2 mm thick． The precise cutting is done by laser． After edging， the weather-resistant black powder coating is applied．This ensures the optimal fit and durability．Through the stepless adjustment you can bring the plate without drilling in the desired position． To keep the plate in this position， there is an additional locking screw．The AKRON-RS turn signal brackets are adjustable in width and therefore suitable for any type of accessory turn signal． This adjustment option allows you to adapt the position for your turn signals to the most varied number plates． To allow mounting the turn signals without disconnecting them from the wiring harness， the 10 mm holes are slotted to the side．You can also adjust the position of the reflector individually via a slider． An adaptation to the different designs of the EU license plates is therefore no problem．To screw the license plate securely and reduce vibration， two rubber washers are included． Another rubber buffer supports the license plate on its underside．Details: - model-specific bracket - infinitely adjustable turn signal holder - slotted turn signal holder for easy mounting without cable separation - infinitely adjustable reflector， E-approved - suitable for European number plates - infinitely adjustable tilt angle - additional screw for optimum position security - easy fixing without further work steps (e． g．B． Drilling) - easy mounting of the license plate through slotted holesIncluded with the AKRON-RS are: - Model-specific bracket with mounting parts - AKRON-RS license plate mounting plate - Adjustable turn signal brackets - E-tested reflector with adjustable bracket - Mounting instructions Notes: - If there are side reflectors fitted to your original number plate holder， these must be refitted in a suitable position or replaced with new ones． - For the original turn signals the special turn signal holder 280-975 is optionally available． Tip: If you have not found a model-specific license plate holder for your vehicle， the universal license plate holders from HIGHSIDER， which are available in many different designs， are certainly a good alternative．■注意点※ナンバープレートサイズが日本の規格ではありませんので、取り付ける際にはステーによる加工などが必要なりますのでご注意下さい。※輸入品のため、説明書が付属する場合、外国語の説明書となります。※メーカー都合により商品の仕様変更がある場合がございます。ご了承ください。 ※画像はイメージです。■商品番号1108109 | 14,469円 |
 Highsider ハイサイダー Akron-RS プロ ナンバープレートホルダー 690Duke 690DukeR ウェビック 楽天市場店 | ■商品概要【メーカー品番】280-306HP■詳細説明HIGHSIDER AKRON-RS PRO license plate holder incl． license plate lightThe HIGHSIDER AKRON-RS PRO license plate holder adapts perfectly to the lines of your bike thanks to its design．The model-specific bracket of the HIGHSIDER AKRON-RS PRO allows mounting on the original mounting points of your bike and thus a replacement without further drilling or cutting． To prevent damage to cables， all sharp-edged feedthroughs are protected by a rubber membrane grommet． The license plate is made of sheet steel and 2 mm thick． The precise cutting is done by laser． After edging， the weather-resistant black powder coating is applied．This ensures the optimal fit and durability．Through the stepless adjustment you can bring the plate without drilling in the desired position． To keep the plate in this position， there is an additional locking screw．The turn signal brackets on the HIGHSIDER AKRON-RS PRO are adjustable in width， making them suitable for any type of accessory turn signal． This adjustment option allows you to adapt the position for your turn signals to the most varied number plates． To allow mounting the turn signals without disconnecting them from the wiring harness， the 10 mm holes are slotted to the side．You can also adjust the position of the reflector individually via a slider． An adaptation to the different designs of the EU license plates is therefore no problem．To screw the license plate securely and reduce vibration， two rubber washers are included． Another rubber buffer supports the license plate on its underside．Included in this PRO version of the HIGHSIDER AKRON-RS is the very small HIGHSIDER license plate light machined from high quality aluminum with mounting plate and support arm． The bracket is adjustable in height and designed to allow mounting in the legally required position．Details: - model-specific bracket - infinitely adjustable turn signal holder - slotted turn signal holder for easy mounting without cable separation - infinitely adjustable reflector， E-approved - suitable for European number plates - infinitely adjustable tilt angle - additional screw for optimum position security - easy fixation without further work steps (eg．e．g． drilling) - easy mounting of the license plate through slotted holes - license plate light incl． Holder included - license plate light， E-approved - infinitely adjustable license plate light - many different options for mounting the license plate light The scope of delivery of the HIGHSIDER AKRON-RS PRO includes: - Model-specific bracket with mounting parts - HIGHSIDER AKRON-RS license plate mounting plate - Adjustable turn signal brackets - E-approved reflector with adjustable bracket - E-approved license plate light - Mounting instructions Notes: - If side reflectors are fitted to your original license plate holder， these must be refitted in a suitable position or replaced with new ones． - For the original turn signals the special turn signal holder 280-975 is optionally available． Tip: If you have not found a model-specific license plate holder for your vehicle， the universal license plate holders from HIGHSIDER， which are available in many different designs， are certainly a good alternative．■注意点※ナンバープレートサイズが日本の規格ではありませんので、取り付ける際にはステーによる加工などが必要なりますのでご注意下さい。※輸入品のため、説明書が付属する場合、外国語の説明書となります。※メーカー都合により商品の仕様変更がある場合がございます。ご了承ください。 ※画像はイメージです。■適合車種690Duke 690Duke 690DukeR 690DukeR ■商品番号1108120 | 20,649円 |
 Highsider ハイサイダー Akron-RS プロ ナンバープレートホルダー Monster ウェビック 楽天市場店 | ■商品概要【メーカー品番】280-163HP■詳細説明HIGHSIDER AKRON-RS PRO license plate holder incl． license plate lightThe HIGHSIDER AKRON-RS PRO license plate holder adapts perfectly to the lines of your bike thanks to its design．The model-specific bracket of the AKRON-RS PRO allows mounting on the original mounting points of your bike and thus a replacement without further drilling or cutting． To prevent damage to cables， all sharp-edged feedthroughs are protected by a rubber membrane grommet． The license plate is made of sheet steel and 2 mm thick． The precise cutting is done by laser． After edging， the weather-resistant black powder coating is applied．This ensures the optimal fit and durability．Through the stepless adjustment you can bring the plate without drilling in the desired position． To keep the plate in this position， there is an additional locking screw．The AKRON-RS PRO’s turn signal brackets are adjustable in width， making them suitable for any type of accessory turn signal． This adjustment option allows you to adapt the position for your turn signals to the most varied number plates． To allow mounting the turn signals without disconnecting them from the wiring harness， the 10 mm holes are slotted to the side．You can also adjust the position of the reflector individually via a slider． An adaptation to the different designs of the EU license plates is therefore no problem．To screw the license plate securely and reduce vibration， two rubber washers are included． Another rubber buffer supports the license plate on its underside．Included in this PRO version of the AKRON-RS is the very small HIGHSIDER license plate light machined from high quality aluminum with mounting plate and support arm． The bracket is adjustable in height and designed to allow mounting in the legally required position．Details: - model-specific bracket - infinitely adjustable turn signal holder - slotted turn signal holder for easy mounting without cable separation - infinitely adjustable reflector， E-approved - suitable for European number plates - infinitely adjustable tilt angle - additional screw for optimum position security - easy fixation without further work steps (eg．e．g． drilling) - easy mounting of the license plate through slotted holes - license plate light incl． Holder included - license plate light， E-approved - infinitely adjustable license plate light - many different options for mounting the license plate light Included with the AKRON-RS PRO are: - Model-specific bracket with mounting parts - AKRON-RS license plate mounting plate - Adjustable turn signal brackets - E-approved reflector with adjustable bracket - E-approved license plate light - Mounting instructions Note:The special 280-972 turn signal bracket is available as an option for the original turn signals． Tip: If you have not found a model-specific license plate holder for your vehicle， the universal license plate holders from HIGHSIDER， which are available in many different designs， are certainly a good alternative．■注意点※ナンバープレートサイズが日本の規格ではありませんので、取り付ける際にはステーによる加工などが必要なりますのでご注意下さい。※輸入品のため、説明書が付属する場合、外国語の説明書となります。※メーカー都合により商品の仕様変更がある場合がございます。ご了承ください。 ※画像はイメージです。■適合車種Monster Monster ■商品番号1108106 | 20,649円 |
 Highsider ハイサイダー Akron-LS バーエンド ウェビック 楽天市場店 | ■商品概要【メーカー品番】161-0592標準カラー：レッド■詳細説明HIGHSIDER AKRON-LS Bar End Weights， black with cap in different colors- Styling for your bike -With these nobly designed Bar End Weights with handlebar end mirror receptacle， you can design your bike in detail according to your ideas． These end pieces are used for all HIGHSIDER & SHIN YO handlebar end mirrors with handlebar outer clamp． Handlebar ends also serve to reduce annoying vibrations on the handlebars． Thanks to clamping system with different sleeves universal suitable for 7/8 (Φ22 mm)， 1 inch (Φ25，4 mm) or X-Bar (Φ28，6 mm) tube handlebars with an inner diameter from 12 to 22 mm．Our accessories TIP:Excellent in combination with the visually coordinated design LENKERGRIFFGUMMIS AKRON from our own house． The caps of the handlebar ends mirror the design of the grip rubbers and make your motorcycle cockpit an eye-catcher． If you do want to switch back to handlebar mirrors， you can easily use the optionally available coloured rings instead of a handlebar end mirror and thus add further colour accents． The colour rings are simply pushed over the end of the handlebar and fastened with the grub screw located on the ring．Precisely matched - the extensive range of accessories from HIGHSIDER is perfectly tailored to your motorcycle． With a maximum of quality and functionality you can easily design your bike according to your wishes．Dimensions:Bar End WeightsΦ: 37，4 mmWidth: 29 mmMount for mirror: Φ 29，90 mm， Width: 12 mmScope of delivery: 1 pair incl．Each 2 clamping sleeves with D． 12 mm and D． 16 mmEach 2 spacer sleeves with D． 14 mm， D． 18 mm and D． 21 mm2 x M6 central screws2 x M6 cone nutsNOTE:For Bar End Weights with clamping system， the ends of the handlebars must not be blocked by threaded inserts or similar．Steering ends do not have to be approved， therefore do not require any test marks， certificates or ABEs．■注意点※輸入品のため、説明書が付属する場合、外国語の説明書となります。※メーカー都合により商品の仕様変更がある場合がございます。ご了承ください。 ※画像はイメージです。■商品番号1108561003 | 7,657円 |
 Highsider ハイサイダー Akron-RS ナンバープレートホルダー RC 125 ABS RC 200 ABS RC 390 ABS RC 390 ADAC CUP RC 390 R ウェビック 楽天市場店 | ■商品概要【メーカー品番】280-309Hカラー：ブラック認証：CE 認証素材：スチール■詳細説明The HIGHSIDER AKRON-RS license plate holder fits perfectly on your motorcycle thanks to its attractive design．The license plate holder is model specific and allows easy mounting on the original mountings without any modifications．Made of 2mm steel and laser cut， the holder has a weather resistant coating．Fully adjustable， you can adjust the holder to the desired position． An additional locking screw ensures that it stays in place．The AKRON-RS turn signal holders are adjustable in width and are therefore suitable for all types of turn signals． This adjustment option allows you to adapt the position of your turn signals to the most diverse license plates． The 10 mm holes are on the side to allow the indicators to be mounted without disconnecting them from the wiring harness．Adjustable reflector， E-approvedSuitable for European license platesAdjustable angle of inclinationAdditional screw for optimal positional safetyEasy mounting without additional drillingEasy mounting of the license plate■注意点※ナンバープレートサイズが日本の規格ではありませんので、取り付ける際にはステーによる加工などが必要なりますのでご注意下さい。※輸入品のため、説明書が付属する場合、外国語の説明書となります。※メーカー都合により商品の仕様変更がある場合がございます。ご了承ください。 ※画像はイメージです。■適合車種RC 125 ABS RC 125 ABS 年式: 14-20 RC 200 ABS RC 200 ABS 年式: 14-19 RC 390 ABS RC 390 ABS 年式: 14-20 RC 390 ADAC CUP RC 390 ADAC CUP 年式: 14-17 RC 390 R RC 390 R 年式: 18 ■商品番号1111130 | 16,529円 |
 Highsider ハイサイダー Akron-RS プロ ナンバープレートホルダー Scrambler 800 ウェビック 楽天市場店 | ■商品概要【メーカー品番】280-161HPカラー：ブラック認証：CE 認証素材：スチール■詳細説明The HIGHSIDER AKRON-RS license plate holder fits perfectly on your motorcycle thanks to its attractive design．The license plate holder is model specific and allows easy mounting on the original mountings without any modifications．Made of 2mm steel and laser cut， the holder has a weather resistant coating．Fully adjustable， you can adjust the holder to the desired position． An additional locking screw ensures that it stays in place．The AKRON-RS turn signal holders are adjustable in width and are therefore suitable for all types of turn signals． This adjustment option allows you to adapt the position of your turn signals to the most diverse license plates． The 10 mm holes are on the side to allow the indicators to be mounted without disconnecting them from the wiring harness．The PRO version of the HIGHSIDER AKRON-RS includes a high-quality aluminum license plate light with mounting plate and support arm． The bracket is height-adjustable and designed for an homolgated mounting．Adjustable reflector， E-approvedSuitable for European license platesAdjustable angle of inclinationAdditional screw for optimal positional safetyEasy mounting without additional drillingEasy mounting of the license plateAdjustable plate light included， holder included■注意点※ナンバープレートサイズが日本の規格ではありませんので、取り付ける際にはステーによる加工などが必要なりますのでご注意下さい。※輸入品のため、説明書が付属する場合、外国語の説明書となります。※メーカー都合により商品の仕様変更がある場合がございます。ご了承ください。 ※画像はイメージです。■適合車種Scrambler 800 Scrambler 800 ■商品番号1111127 | 23,617円 |
 Highsider ハイサイダー Akron-RS プロ ナンバープレートホルダー 690SMC ウェビック 楽天市場店 | ■商品概要【メーカー品番】280-319HP■詳細説明HIGHSIDER AKRON-RS PRO license plate holder incl． license plate lightThe HIGHSIDER AKRON-RS PRO license plate holder adapts perfectly to the lines of your bike thanks to its design．The model-specific bracket of the HIGHSIDER AKRON-RS PRO allows mounting on the original mounting points of your bike and thus a replacement without further drilling or cutting． To prevent damage to cables， all sharp-edged feedthroughs are protected by a rubber membrane grommet． The license plate is made of sheet steel and 2 mm thick． The precise cutting is done by laser． After edging， the weather-resistant black powder coating is applied．This ensures the optimal fit and durability．Through the stepless adjustment you can bring the plate without drilling in the desired position． To keep the plate in this position， there is an additional locking screw．The turn signal brackets on the HIGHSIDER AKRON-RS PRO are adjustable in width， making them suitable for any type of accessory turn signal． This adjustment option allows you to adapt the position for your turn signals to the most varied number plates． To allow mounting the turn signals without disconnecting them from the wiring harness， the 10 mm holes are slotted to the side．You can also adjust the position of the reflector individually via a slider． An adaptation to the different designs of the EU license plates is therefore no problem．To screw the license plate securely and reduce vibration， two rubber washers are included． Another rubber buffer supports the license plate on its underside．Included in this PRO version of the HIGHSIDER AKRON-RS is the very small HIGHSIDER license plate light machined from high quality aluminum with mounting plate and support arm． The bracket is adjustable in height and designed to allow mounting in the legally required position．Details: - model-specific bracket - infinitely adjustable turn signal holder - slotted turn signal holder for easy mounting without cable separation - infinitely adjustable reflector， E-approved - suitable for European number plates - infinitely adjustable tilt angle - additional screw for optimum position security - easy fixation without further work steps (eg．e．g． drilling) - easy mounting of the license plate through slotted holes - license plate light incl． Holder included - license plate light， E-approved - infinitely adjustable license plate light - many different options for mounting the license plate light The scope of delivery of the HIGHSIDER AKRON-RS PRO includes: - Model-specific bracket with mounting parts - HIGHSIDER AKRON-RS license plate mounting plate - Adjustable turn signal brackets - E-approved reflector with adjustable bracket - E-approved license plate light - Mounting instructions Notes: - If side reflectors are fitted to your original license plate holder， these must be refitted in a suitable position or replaced with new ones． - For the original turn signals the special turn signal holder 280-975 is optionally available． Tip: If you have not found a model-specific license plate holder for your vehicle， the universal license plate holders from HIGHSIDER， which are available in many different designs， are certainly a good alternative．■注意点※ナンバープレートサイズが日本の規格ではありませんので、取り付ける際にはステーによる加工などが必要なりますのでご注意下さい。※輸入品のため、説明書が付属する場合、外国語の説明書となります。※メーカー都合により商品の仕様変更がある場合がございます。ご了承ください。 ※画像はイメージです。■適合車種690SMC 690SMC ■商品番号1108134 | 18,588円 |
 Highsider ハイサイダー Akron-RS プロ ナンバープレートホルダー SV650 ウェビック 楽天市場店 | ■商品概要【メーカー品番】280-820HP■詳細説明HIGHSIDER AKRON-RS PRO license plate holder incl． license plate lightThe HIGHSIDER AKRON-RS PRO license plate holder adapts perfectly to the lines of your bike thanks to its design．The model-specific bracket of the HIGHSIDER AKRON-RS PRO allows mounting on the original mounting points of your bike and thus a replacement without further drilling or cutting． To prevent damage to cables， all sharp-edged feedthroughs are protected by a rubber membrane grommet． The license plate is made of sheet steel and 2 mm thick． The precise cutting is done by laser． After edging， the weather-resistant black powder coating is applied．This ensures the optimal fit and durability．Through the stepless adjustment you can bring the plate without drilling in the desired position． To keep the plate in this position， there is an additional locking screw．The turn signal brackets on the HIGHSIDER AKRON-RS PRO are adjustable in width， making them suitable for any type of accessory turn signal． This adjustment option allows you to adapt the position for your turn signals to the most varied number plates． To allow mounting the turn signals without disconnecting them from the wiring harness， the 10 mm holes are slotted to the side．You can also adjust the position of the reflector individually via a slider． An adaptation to the different designs of the EU license plates is therefore no problem．To screw the license plate securely and reduce vibration， two rubber washers are included． Another rubber buffer supports the license plate on its underside．Included in this PRO version of the HIGHSIDER AKRON-RS is the very small HIGHSIDER license plate light machined from high quality aluminum with mounting plate and support arm． The bracket is adjustable in height and designed to allow mounting in the legally required position．Details: - model-specific bracket - infinitely adjustable turn signal holder - slotted turn signal holder for easy mounting without cable separation - infinitely adjustable reflector， E-approved - suitable for European number plates - infinitely adjustable tilt angle - additional screw for optimum position security - easy fixation without further work steps (eg．e．g． drilling) - easy mounting of the license plate through slotted holes - license plate light incl． Holder included - license plate light， E-approved - infinitely adjustable license plate light - many different options for mounting the license plate light The scope of delivery of the HIGHSIDER AKRON-RS PRO includes: - Model-specific bracket with mounting parts - HIGHSIDER AKRON-RS license plate mounting plate - Adjustable turn signal brackets - E-approved reflector with adjustable bracket - E-approved license plate light - Mounting instructions Notes: - If side reflectors are fitted to your original license plate holder， these must be refitted in a suitable position or replaced with new ones． - The special turn signal holder 280-976 is optionally available for the original turn signals． Tip: If you have not found a model-specific license plate holder for your vehicle， the universal license plate holders from HIGHSIDER， which are available in many different designs， are certainly a good alternative．■注意点※ナンバープレートサイズが日本の規格ではありませんので、取り付ける際にはステーによる加工などが必要なりますのでご注意下さい。※輸入品のため、説明書が付属する場合、外国語の説明書となります。※メーカー都合により商品の仕様変更がある場合がございます。ご了承ください。 ※画像はイメージです。■適合車種SV650 SV650 ■商品番号1108287 | 18,588円 |
 Highsider ハイサイダー Akron-RS ナンバープレートホルダー (ライト なし) CBR650R CB650R ウェビック 楽天市場店 | ■商品概要【メーカー品番】280-620H■詳細説明HIGHSIDER AKRON-RS license plate holderThe HIGHSIDER AKRON-RS license plate holder adapts perfectly to the lines of your bike thanks to its design．The model-specific bracket of the HIGHSIDER AKRON-RS allows mounting on the original mounting points of your bike and thus a replacement without further drilling or cutting．To prevent damage to cables， all sharp-edged feedthroughs are protected by a rubber membrane grommet．The license plate is made of sheet steel and 2 mm thick． The precise cutting is done by laser． After edging， the weather-resistant black powder coating is applied．This ensures the optimal fit and durability．Through the stepless adjustment you can bring the plate without drilling in the desired position． To keep the plate in this position， there is an additional locking screw．The turn signal brackets of the HIGHSIDER AKRON-RS are adjustable in width and therefore suitable for any type of accessory turn signal． This adjustment option allows you to adapt the position for your turn signals to the most varied number plates． To allow mounting the turn signals without disconnecting them from the wiring harness， the 10 mm holes are slotted to the side．You can also adjust the position of the reflector individually via a slider． An adaptation to the different designs of the EU license plates is therefore no problem．To screw the license plate securely and reduce vibration， two rubber washers are included． Another rubber buffer supports the license plate on its underside．Details:- model-specific bracket- continuously adjustable turn signal holder- slotted turn signal holder for easy mounting without cable separation- continuously adjustable reflector， E-approved- suitable for European number plates- continuously adjustable angle of inclination- additional screw for optimum position security- easy fixing without further work steps (e． g．B． Drilling)- easy mounting of the license plate through slotted holesIncluded in the scope of delivery of the HIGHSIDER AKRON-RS are:- Model-related bracket with mounting parts- HIGHSIDER AKRON-RS license plate mounting plate- Adjustable turn signal brackets- E-tested reflector with adjustable bracket- Mounting instructionsTip:Should you not have found a model-specific license plate holder for your vehicle， the universal license plate holders from HIGHSIDER， which are available in many different designs， are certainly a good alternative．Note:Should at your original license plate holder lateral■注意点※ナンバープレートサイズが日本の規格ではありませんので、取り付ける際にはステーによる加工などが必要なりますのでご注意下さい。※輸入品のため、説明書が付属する場合、外国語の説明書となります。※メーカー都合により商品の仕様変更がある場合がございます。ご了承ください。 ※画像はイメージです。■適合車種CBR650R CBR650R CB650R CB650R ■商品番号1108189 | 16,529円 |
 Highsider ハイサイダー Akron-RS ナンバープレートホルダー R NINE T /5 R NINE-T ABS (0A06) R NINE-T ABS (0J01) R NINE-T PURE ABS (0J11) R NINE-T RACER ABS (0J21) R NINE-T SCRAMBLER ABS (0J31) R NINE-T URBAN G/S ABS (0J41) ウェビック 楽天市場店 | ■商品概要【メーカー品番】280-103Hカラー：ブラック認証：CE 認証素材：スチール■詳細説明The HIGHSIDER AKRON-RS license plate holder fits perfectly on your motorcycle thanks to its attractive design．The license plate holder is model specific and allows easy mounting on the original mountings without any modifications．Made of 2mm steel and laser cut， the holder has a weather resistant coating．Fully adjustable， you can adjust the holder to the desired position． An additional locking screw ensures that it stays in place．The AKRON-RS turn signal holders are adjustable in width and are therefore suitable for all types of turn signals． This adjustment option allows you to adapt the position of your turn signals to the most diverse license plates． The 10 mm holes are on the side to allow the indicators to be mounted without disconnecting them from the wiring harness．Adjustable reflector， E-approvedSuitable for European license platesAdjustable angle of inclinationAdditional screw for optimal positional safetyEasy mounting without additional drillingEasy mounting of the license plate■注意点※ナンバープレートサイズが日本の規格ではありませんので、取り付ける際にはステーによる加工などが必要なりますのでご注意下さい。※輸入品のため、説明書が付属する場合、外国語の説明書となります。※メーカー都合により商品の仕様変更がある場合がございます。ご了承ください。 ※画像はイメージです。■商品番号1111122 | 21,664円 |